KUNBUS-TAP2100, the universal network monitor solution for real-time Industrial Ethernet Bus Systems
The TAP2100 Ethernet Data Sniffer made by KUNBUS GmbH represents a network monitoring tool for the analysis of all common Industrial Ethernet solutions. The device features four 100MBit/s sample ports which enables a user to monitor of up to two independent real-time Ethernet connections. The KUNBUS-TAP Data Sniffer has an internal throughput delay of 0 μs (zero delay) which makes it almost transparent for the data channels under test. An additional standard Gigabit Ethernet interface connects the Data Sniffer to a PC. Reading and evaluation of the tapped packet data is done with freely available network monitors, such as "Wireshark".
Fields of Application
- Test Access Point (Ethernet)
- Analysis of CRC errors
- Comparison of in and out frames
- Measuring of jitter and delay
- Measuring system for real-time Ethernet bus systems
- Number of Ethernet ports 4 + 1 (monitoring of 2 lines)
- Uplink port: - 1 Gbps 1000BASE-T Ethernet - RJ45 socket
- Sampling ports: - 100 Mbps 100BASE-TX Ethernet - RJ45 socket
- Throughput delay ~0 µs (zero delay)
- Resolution time stamp 1 ns
- Diagnosis: 3 LEDs
- Full duplex operation
- Unfiltered transmission of CRC errors
- Supply voltage 12 to 30 V DC or 230 V AC plug power pack
- Weight ca. 150 g
- Dimensions (W x H x D) ca. 100 mm x 150 mm x 40 mm
- Rubberized for impact protection
- Foldable pivot foot
- Allowable ambient temperature range during operation 0 °C ... + 55 °C
- Allowable ambient temperature for storage -25 °C ... + 85 °C
- Allowable relative humidity 95 %, no condensation
- EMC-tested
- Protection type IP 20
- CE certification
| Quickstart Instructions TAP2100 |
| Quickstart Instructions Guide |