PCAN-MicroMod Mix1

IPEH-002202
$269.00
PEAK PCAN-MicroMod Motherboards represent a family of implementation-ready CAN or CANopen I/O systems suitable for a wide range of industrial control applications. Typical characteristics of this product group include a wide supply voltage range and the protective circuit for the inputs and outputs. Each motherboard comes with a PCAN-MicroMod installed and is enclosed in a compact and robust aluminum casing. Firmware included in the MicroMod CPU module handles all input/output processing and CAN communication and each is completely configurable using the Windows® PCAN-MicroMod configuration software. The PCAN-MicroMod evaluation board is also available to jump-start custom development.

The Mix 1 motherboard combines general analog and digital requirements with temperature recording functions.

  • Completely configurable using the Windows® software PCAN-MicroMod Configuration
  • Communication through High-speed CAN
  • Operating voltage 8 - 26 V
  • Aluminum casing with spring terminal connectors. Optional DIN rail fixing option available
  • Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)

6 digital inputs with the following properties:

  • Pull-up or Pull-down circuit selectable in groups (3 groups)
  • Voltage level difference 5 - 18 V
  • Schmitt trigger behavior, inverting
  • Low pass behavior
  • Parallel switching of one frequency input for 4 digital inputs for an alternative use (e.g. for fast status changes, counters)

2 analog inputs with the following properties:

  • Pull-down circuit
  • Measuring range unipolar 0 - 5 V
  • Resolution 10 bit, sample rate 1 kHz
  • Measuring range extension optional
  • Protection against under- and overvoltages

2 temperature inputs for the connection of NTC resistors (type EC95F103W), measuring range 0 - 70 ºC (32 to 158 °F)

2 digital outputs (frequency outputs) with the following properties:

  • Fast Low-side switch, max. 55 V, 0.75 A
  • Short-circuit protection
Power Supply Operating voltage: +Ub 8 - 26 V DC (±5 %)
Current consumption: max. 200 mA, typ. 35 mA at 12 V w/o load
Ripple 5 V: < 50 mV (Ub = 12 V, 200 mA load)
Ripple analog: < 20 mV
Reverse-polarity protection: extant; can get ineffective by the wiring with other CAN nodes (danger of destruction of electronic components)
Digital inputs Count: 6
Switching thresholds: UIH = 4 V; UIL = 3 V, contact or logic level
Input impedance: 2.7 kΩ
Open input: Pull-up, optionally pull-down (in groups)
Overvoltage protection: extant
Low-pass: fg = 7 kHz
Special feature: Frequency inputs of the PCAN-MicroMod parallel (only DIn 0 to DIn 3)
Digital outputs Count: 2
Type: Low-side
Voltage proof: < 55 V
Output current: 0.75 A (constant current)
Short circuit protection: extant; short-circuit current: 1.2 A
Analog inputs Count: 2
Measuring range: 0 to 5 V, extendable
Resolution: 10 bit
Source impedance: < 5 kΩ
Overvoltage protection: extant
Low-pass: fg = 66 Hz
Temperature inputs Count: 2
Reference sensor type: Thermistor EC95F103W (e.g. RS Components part no. 151-237, form factor: bead) [Other sensor type and measuring range on request]
Measuring range: 0 to 70 °C (32 to 158 °F) corresponding 5 to 0 V (anti-proportional)
Resolution: ±1.0 °C (due to sensor)
CAN Transmission standard: High-speed CAN ISO 11898-2, typ. 500 kbit/s, setup with PCAN-MicroMod Configuration (Windows software)
Termination: none
CAN ID reserved for configuration transfer: 0x7E7
Module number at delivery (for configuration transfer): 0
Peculiarity Interference Immunity Tests: compliant to IEC 61000 and DIN EN 61326
Surge: ±500 V (specification industrial sector: ±1 kV) [see User's Manual for more details]
Line-conducted HF compatibility: 10 Veff (specification: 3 Veff
Dimensions 55 x 68 x 24 mm, see User's Manual for more details - Casing size (incl.connectors)
Weight 109 g
Operating temperature -40 - +85 °C (-40 - +185 °F)
Storage temperature -40 - +100 °C (-40 - +212 °F)
Relative humidity 15% to 90% (non-condensing)
Ingress protection (IEC 60529) IP20
EMC DIN EN 61326-1:2008-06, EC directive 2004/108/EG

You recently viewed

Clear recently viewed