Expansion module for DeviceNet networks
When using our RevPi Gate DeviceNet gateway, integrating Revolution Pi into a DeviceNet network is no problem. Like all Revolution Pi expansion modules, the gateway is connected to the base module RevPi Core via the overhead Pi Bridge connector. Thus, up to two gateway modules can be used per system.
Review the UL Certificate.
| Module version | Slave |
| Network connector | Phoenix plug 5-pin RM 5.08 |
| max. baud rate | up to 500 Kbit/s |
| I/O data | 512 Bytes IN/OUT |
| Protection class | IP20 |
| Power | 24 V DC (-15/+20%) |
| Current consumption | 100 mA |
| Dimensions | 110.4 x 22.5 x 101.4 mm |
| Weight | approx. 90 g |
| Reverse voltage protection | Yes |
| Operating temperature | 0 °C to 60 °C |
| Storage temperature | -25°C to 70 °C |
| max. relative humidity (at 40 °C) | 93 % (non condensing) |
| Casing material | Polycarbonate |
| Mounting | DIN rail (EN50022) |
| CAN Ethernet Gateway - Product Flyer |
| CAN Ethernet Gateway - Product Flyer in PDF Format |
| Gateway module DeviceNet Slave manual |
| Gateway module DeviceNet Slave Manual in PDF Format |