Click or scroll to zoom
Tap or pinch to zoom
Click or scroll to zoom
Tap or pinch to zoom
Integrate Revolution Pi (RevPi) into an industrial network with the expansion module for serial networks.
When using our RevPi Gate Serial gateway, integrating Revolution Pi into a serial network is no problem. Like all Revolution Pi expansion modules, the gateway is connected to the base module RevPi Core via the overhead Pi Bridge connector. Thus, up to two gateway modules can be used per system.
|
Module version |
Slave |
|
supported Protocol versions |
RS232, RS485, RS422 |
|
Network connector |
Weidmüller plug 8-pin 3.50 |
|
max. baud rate |
TBA |
|
I/O data |
TBA |
|
Protection class |
IP20 |
|
Power |
24 V DC (-15/+20%) |
|
Current consumption |
100 mA |
|
Dimensions |
110.4 x 22.5 x 101.4 mm |
|
Weight |
approx. 90 g |
|
Reverse voltage protection |
Yes |
|
Operating temperature |
0 °C to 60 °C |
|
Storage temperature |
-25°C to 70 °C |
|
max. relative humidity (at 40 °C) |
93 % (non condensing) |
|
Casing material |
Polycarbonate |
|
Mounting |
DIN rail (EN50022) |
