Kvaser PCIEcan 2xHS v2KV-00861-8
Product is no longer available.
This product is EOL and not intended for new designs.
The Kvaser PCIEcan 2*HS V2 is a highly integrated, high-speed controller area network (CAN) insert card that adds two single high-speed (ISO 11898-2) CAN channels to any standard computer board with PCI Express slot. At 86 x 69 mm, this has a smaller footprint and lower profile than the previous model, the PCIEcan HS/HS (KV-00405-4).
The Kvaser PCIEcan 2*HS V2 is CAN FD compliant and offers silent mode, error frame detection/generation as well as an on-board buffer making it a great fit for many embedded data acquisition systems.
- Standard (PCIe-x1) PCI Express interface
- Quick and easy plug-and-play installation
- Supports High Speed CAN (ISO 11898-2) up to 1Mbit/s
- Supports CAN 2.0 A and 2.0 B (active)
- Supports CAN FD up to 8Mbit/s (with proper physical layer implementation)
- Low profile card allows ultra-compact systems
- Includes low and high profile brackets
- Implements Kvaser’s CAN IP in an FPGA, resulting in high max message rate
- Yellow LED indicates when a CAN message was received or sent
- Fully compatible with J1939, CANopen, NMEA 2000 and DeviceNet
- Fully compatible with applications written for other Kvaser CAN hardware with Kvaser CANlib
- Supports silent mode for analysis tools – listens to the bus without interfering
- Detection and generation of error frames and remote frames
- Designed for standard and industrial computers
- Galvanically isolated CAN bus drivers
- Extended operating temperature range from -40 to 85°C
- 2-Year Warranty. See our General Conditions and Policies for details
- Free Technical Support on all products available by contacting email@example.com
- J2534 Application Programming Interface available
- RP1210A Application Programming Interface available
|The information herein is subject to change without notice.
|Error frame generation
|Error frame detection
|On board buffer
|Maximum message rate, send
|Maximum message rate, receive
|Operating Temp Range
|86 mm * 69 mm
|The Canlib module is a Python wrapper for Kvaser CANlib SDK.
|Kvaser CANlib SDK
|Software development kit - everything you need to develop software for the Kvaser CAN and LIN interfaces. Libraries, header files, sample programs for e.g. C, C++, C#, Visual Basic and Delphi, documentation, and more. Note: you need to download and install the appropriate device drivers separately.
|Kvaser SocketCAN Device Drivers
|Kvaser SocketCAN Drivers for Linux.
|Kvaser DIADEM Driver
|This free driver for National Instrument's DIAdem supports all CAN hardware from Kvaser.
|Kvaser Drivers for Windows
|Windows drivers for all our CAN hardware. Please check release notes for information on which Windows versions are supported. It also contain a driver for the virtual CAN bus.
|A free of charge general-purpose CAN bus momnitor. Works with all CAN interfaces from Kvaser. Windows 200 and later recommended.
|Kvaser LabView VI Library for CAN
|Library for National Instrument's LabView version for all Kvaser CAN hardware.
|Kvaser Linux Driver and SDK
|Linux driver and SDK for Kvaser PCIcan/PCIcanx, Kvaser PCIcanII, Kvaser PC104+, Kvaser PCIcanx II, Kvaser USBcan II, Kvaser Memorator*, Kvaser Leaf family, Kvaser Memorator Pro**, Kvaser USBcan Pro and VirtualCAN. For LAPcan and LAPcan II, you should use version 4.2 of the driver. (*) only with USBcanII functionality, (**) only with USBcan Pro functionality
|Remove old drivers
|Driver removal program. This program will remove the CAN driver (version 3.2 or older) from your computer. This is a version intended for those who have installed CANLIB 3.2 or older. Use it only if you need to remove an old version of the driver from your computer. Contact technical support if you have any questions.
|Driver removal program. This program will remove the CAN driver (version 3.9 or older) from your computer. This program will not work with driver 4.0 or later. Use it only if you need to remove an old version of the driver from your computer.