Chat with us, powered by LiveChat Skip to content

Kvaser Memorator HS/LS CAN Datalogger

KV-00170-1

Product is no longer available.

Kvaser Memorator is a dual channel CAN bus interface as well as standalone CANbus data logger. When operated in stand-alone mode this device logs data to an SD card (128 MByte card included). In CAN interface mode the

Memorator connects to the PC with USB1.1 port (USB 2.0 compatible). The first CAN channel is always for high-speed CAN connection, while the second CAN channel in this configuration is for a low-speed CAN bus. 

The Kvaser Memorator features a USB connection and can be used as a powerful CAN to USB interface (like the Kvaser USBcan II Adapter) as well as a standalone CAN data logger - two products in one! Its compact design makes this device an ideal flight recorder for example when used as a data logger. Device configuration is performed via a user-friendly configuration program and configuration data is stored on the unit's Flash disk.

Kvaser Memorator Functions:

Triggers

Kvaser Memorator can log continuously, or logging can be triggered by external triggers (rising or falling edge) and/or by messages and signals on the CAN bus (triggered by identifier, or data contents.) Pre- and post-triggers are available.

Filters

To enhance logging performance, Kvaser Memorator can filter out selectable messages to be logged. The identifiers can be picked from a database, or all messages can be logged.

Memory Cards

Standard MMC or SD type flash memory cards can be used. Larger memory cards, up to 1 GB, can be used. See our support pages for more information.

Configuration software in the PC:

  • Configuration of the CAN controller, i.e. bit rate and filters.
  • Configuration of the trigger conditions.
  • Configuration of filter for messages to be stored.
  • Configuration upload and download via USB
  • One device for desktop and laptop.
  • Quick and easy plug-and-play installation.
  • Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers.
  • CAN messages are time-stamped with 10 microseconds resolution.
  • Large on-board RAM buffer for CAN messages.
  • Supports listen-only mode for bus analysis tools.
  • Driver support for major operating systems.
  • 100% compatible with applications written for Leaf, LAPcan, PCIcan, PCcan and USBcan with Kvaser's CANlib.
  • One SD/MMC connector that accepts SD or MMC flash disks, currently up to 1 GB.
  • One CAN connection ISO-11898 high-speed, 50kbit/s up to 1 Mbit/s (Philips TJA1050).
  • Optional, second CAN connection that can be either high-speed (TJA1050), low-speed (Philips TJA1054), or single-wire (AU5790)
  • One USB 1.1 connection (12 Mbit/s). This connection is compatible with USB 2.0.
  • Power from CAN bus or from the USB side.
  • Built-in real time (calendar) clock with battery backup.
  • Logger status is indicated with four externally visible LEDs.
  • Plastic housing with dimension WxLxH about 50x90x25 mm (circa 2 x 3,5 x 1 inch)
Property Value
The information herein is subject to change without notice.
Galvanic Isolation No
Bitrate 10-1000 kbit/s
Silent mode Yes
Error frame generation Yes
Error frame detection Yes
Weight 150 grams
Timestamp resolution 30
On board buffer Yes
Maximum message rate, send 6000
Maximum message rate, receive 12000
Sound No
Clock synchronization N/A
Dimensions (WxLxH) 50x90x25 mm (2.0x3.5x1.0in.)
Getting Started Kvaser Memorator / Memorator Professional as Datalogger
Startup Guide Getting Started Kvaser Memorator /Memorator Professional as Datalogger
Version 2.0.0
Kvaser Database Editor Users Guide
Kvaser Database Editor Users Guide
Version 2.0.0
Kvaser Memorator Example
Kvaser Memorator Tools Setup Example
Version 2.0.0
Kvaser Memorator Tools Introduction
Introduction to Kvaser Memorator Tools for Kvaser Memorator Professional.
Version 1.0.0
Kvaser Memorator Trigger Guide
Kvaser Memorator Setup Tool - Trigger Guide
Version 2.0.0
Kvaser Memorator Users Guide
Kvaser Memorator Professional User's Guide
Version 7.0.0
Trigger Kit for the Kvaser Memorator Family
Trigger Kit for the Kvaser Memorator Family
Version 2.0.0
Kvaser DIADEM Driver
This free driver for National Instrument's DIAdem supports all CAN hardware from Kvaser.
Version 1.0.0
Kvaser Drivers for Windows
Windows drivers for all our CAN hardware. Please check release notes for information on which Windows versions are supported. It also contain a driver for the virtual CAN bus.
Version 5.6.0
Kvaser Leaf V2 Firmware
Firmware Kvaser Leaf Light V2
Version 3.2.302
Kvaser CANKing
A free of charge general-purpose CAN bus momnitor. Works with all CAN interfaces from Kvaser. Windows 200 and later recommended.
Version 5.3.889
Kvaser CANlib SDK
Software development kit - everything you need to develop software for the Kvaser CAN and LIN interfaces. Link libraries, header files, sample programs, Microsoft Visual Basic and Borland Delphi components, documentation, and more. Note: you need to download and install the appropriate device drivers separately
Version 5.6.0
Kvaser LabView VI Library for CAN
Library for National Instrument's LabView version for all Kvaser CAN hardware.
Version 6.1.0
Kvaser Linux Driver and SDK
Linux driver and SDK for Kvaser PCIcan/PCIcanx, Kvaser PCIcanII, Kvaser PC104+, Kvaser PCIcanx II, Kvaser USBcan II, Kvaser Memorator*, Kvaser Leaf family, Kvaser Memorator Pro**, Kvaser USBcan Pro and VirtualCAN. For LAPcan and LAPcan II, you should use version 4.2 of the driver. (*) only with USBcanII functionality, (**) only with USBcan Pro functionality
Version 5.3.0
Remove old drivers
Driver removal program. This program will remove the CAN driver (version 3.2 or older) from your computer. This is a version intended for those who have installed CANLIB 3.2 or older. Use it only if you need to remove an old version of the driver from your computer. Contact technical support if you have any questions.
Version 3.9c