
sysWORXX CTR-710 Controller
Efficient Pre-Assembly Controller
Our sysWORXX CTR-710 is a freely programmable Linux compact controller that enables easy exchange of field devices. It is fully compatible with the sysWORXX CTR-700 and features Molex Micro Clasp connectors for quick-release connection of all local inputs and outputs. The removable connectors allow efficient pre-assembly of the connection cables.
The CTR-710 is also programmable as PLC in IEC 61131-3 with the programming environment OpenPCS. It is ready for use with all common cloud providers through standard protocols such as MQTT and REST. This module is particularly suitable for the use of pre-assembled cable harnesses and installation by untrained personnel, making it possible to manage a complete exchange of your devices on site in the shortest possible time. Node-RED, a low-code environment, is immediately usable for easy entry, even for non-informaticians.
- Molex Micro Clasp Connectors, 2mm Pitch
- Independent Ethernet interfaces for secure separation of enterprise IT and store floor OT
- Various protocols
- CAN, CANopen
- Modbus RTU and TCP
- MQTT
- Shielded backplane extension bus
- Suitable for DIN-rail mounting
-
WLAN connection via external antenna
Value | ||||||
---|---|---|---|---|---|---|
The information herein is subject to change without notice. | ||||||
Physical | ||||||
60 x 162 x 91 mm | ||||||
0ºC … +55ºC | ||||||
10 … 95% non-condensing (VDE 0110) | ||||||
CPU: | ||||||
NXP i.MX7 | ||||||
Dual Cortex-A7 | ||||||
1000 | ||||||
3800 | ||||||
Yes | ||||||
Yes, CPU sensor and IO board | ||||||
Memory: | ||||||
1024 MB | ||||||
8GB eMMC | ||||||
Software: | ||||||
|
||||||
OpenPCS RT, OPC UA server for OpenPCS | ||||||
Third Party Software; downloadable via Debian OS repositories | ||||||
Connectivity: | ||||||
2 (each with its own MAC address) | ||||||
2 (CANopen, CAN layer 2) | ||||||
3 (RS485, RS232) | ||||||
1 | ||||||
1 | ||||||
Serial (via USB) | ||||||
Prepared for use with cloud providers such as IBM Watson | ||||||
I/O Interfaces | ||||||
Digital inputs: 16 |
||||||
2 (alternate functions – depending on used A/B-Encoder) | ||||||
2 (alternate functions – depending on used High-speed Counter) | ||||||
A/B Encoder: 1 |
||||||
Highspeed Counter: 1 | ||||||
Digital outputs: 16 |
||||||
Analog: 4 | ||||||
Relay: 2 | ||||||
PWM: 2 | ||||||
Controls | ||||||
Run/Stop; Config, Reset, Boot | ||||||
Power CPU; Power Periphery, Run, Error, extras | ||||||
SFTP/SSH |
System Manual |
System Manual sysWORXX CTR-710 |
Datasheet |
Datasheet CTR-710 |
Brochure |
Brochure sysWORXX CTR-710 |