Chat with us, powered by LiveChat Skip to content

RevPi Connect+ w/ CODESYS

SKU #: KU-PR100337
Sold out

This item is currently out of stock. Please email or contact us for lead times and availability.

The RevPi Connect+ feat. CODESYS can be used as a powerful, industrial small controller for a variety of different automation tasks and represents a real alternative to complex and cost-intensive PLCs. The RevPi Connect+ feat. CODESYS consists of a RevPi Connect+ and a multicore capable CODESYS Control runtime system.

The RevPi Connect+ base module can be expanded by a variety of digital and analog I/O and gateway expansion modules. All RevPi expansion modules have been seamlessly integrated into CODESYS and can be controlled and configured via the integrated development environment. The CODESYS Runtime inherently supports many fieldbus or Industrial Ethernet protocols such as PROFINET, EtherCAT, EtherNet/IP or CANopen and thus enables the use of the RevPi as a soft PLC in such networks.The CODESYS Runtime inherently supports many fieldbus or Industrial Ethernet protocols such as PROFINET, EtherCAT, EtherNet/ IP or CANopen and thus enables the use of the RevPi as a soft PLC in such networks.

With the included CODESYS WebVisu, user interfaces or visualization masks can be generated and displayed on PCs, tablets or smartphones via all common browsers. This eliminates the need for separate HMI software. In addition to running the CODESYS Control runtime, individual applications can still be installed or programmed via Node-RED, Python or directly in C, among others. 

Review the UL Certificate.

  • Freely programmable
  • Modular and expandable design
  • Two Ethernet ports
  • RS485 screw terminal
  • Hardware watchdog
  • Supports all major industrial network protocols
  • Node-RED
  • Python
Housing dimensions
(H x W x D)
96 x 45 x 110.5 mm
Housing type DIN rail housing (for DIN rail version EN 50022)
Housing material Polycarbonate
Weight approx. 197 g / 224 g (incl. connectors)
IP Code IP20
Power supply 12-24 V DC -15%-/ +20%
Max. power consumption 20 Watt (incl. 1 A total USB output current) 1
Operating temperature -40 °C....+55 °C2
Storage temperature -40 °C....+85 °C
Humidity (at 40°C) 93% (non-condensing)
Interfaces 2 x USB A (Total current draw from both sockets max. 1 A) 3
2 x RJ45 10/100 Ethernet (using separate MAC addresses)
1 x RS485 screw-type terminal (not galvanically isolated)
1 x Micro-USB (solely for image transfer to eMMC)
1 x Micro HDMI
1 x PiBridge system bus
1 x ConBridge system bus
Connectors 1 x 4-pole screw-type terminal for relay contact and signal input
1 x 8-pole spring clamp connector for power supply
Processor BCM2837B0, ARM Cortex A53 quad-core (ARMv8)
Clock rate 1.2 GHz 2
Processor cooling Passive with heat sink
RAM 1 GByte
Flash memory 16 GByte
Number of digital input channels 1
Input type 24 V control voltage (e.g. for power-good signal of a UPS)
Input thresholds approx. 3.0V (0 -> 1) / 2.3V (1 -> 0)
Input protection against overvoltage, negative voltages
Number of digital output channels 1
Output type Relay contact, approval up to 30 V switching voltage (e.g. for power supply of a router)
Maximum current load of the contact 2A @ 30V DC (resistive load!)
Software integration of input and output Via GPIOs and process image. Output is optionally switched by hardware watchdog
Hardware watchdog functionality Can be disabled by bridging the 4-pole screw-type terminal. Reset by toggling a GPIO or alternatively a bit in the process image
Hardware watchdog interval Trigger after approx. 60 seconds without toggling the reset bit
Compatible modules for system expansion All RevPi IO modules and RevPi Gate modules can be connected via the PiBridge system bus. Various transceiver modules can be connected via the ConBridge system bus.
ESD protection 4 kV / 8 kV (according to EN61131-2 and IEC 61000-6-2)
EMI tests Passed (according to EN61131-2 and IEC 61000-6-2)
Surge/Burst tests Passed (according to EN61131-2 and IEC 61000-6-2)
Buffer time RTC min. 24 h
Optical indicator 6 status LEDs (bi-color), two of them freely programmable
RoHS conformity Yes
CE conformity Yes
UL certification Yes, UL-File-No. E494534
Quickstart Guide
RevPi Connect+ Quick-start Guide
Technical Data Sheet
RevPi Connect+ Technical Data Sheet
Release Notes
Buster Release Notes