Kvaser PCI104 HS/HS IDC
Compact and self-stacking, the Kvaser PCI104 board complies with the flexible PCI-104 specification. The Kvaser PCI104 board represents a dual channel CAN interface, with a high performance microcontroller onboard.
- Compliant with the PCI-104 specification
- Stack-through connector
- On-board 16-bit microcontroller
- Communicates with the PC through a fast DPRAM
- CAN Controller from Renesas (M16C)
- Supports CAN 2.0 A and 2.0 B (active)
- Supports Silent Mode
- High-speed ISO 11898 compliant driver circuits, supports bit rates up to 1 Mbit/s
- Optoisolated driver circuits with fast optocouplers
- CAN oscillator frequency: 16 MHz
- Quick and easy plug-and-play installation
- Dimensions 91 x 96 mm (approx. 3.6 x 3.8 in.)
- Interfaces the CAN bus with IDC Headers
- Wide temperature range, -40°C - +85°C
|The information herein is subject to change without notice.|
|Current Consumption||Approximately 1W @ 200mA|
|Error frame generation||Yes|
|Error Conters Reading||Yes|
|Timestamp resolution (µs)||100 µs|
|Maximum message rate, receive||14000 mps|
|Dimensions (WxLxH)||91x96x20 mm (3.6x3.8x0.8in.)|
|OS||Win XP, Linux, Win 7, Win Vista, Win 10, Win 8|
|Kvaser PC104+ Firmware|
|Firmware update for Kvaser PC104+
|The Canlib module is a Python wrapper for Kvaser CANlib SDK.
|Kvaser CANlib SDK|
|Software development kit - everything you need to develop software for the Kvaser CAN and LIN interfaces. Libraries, header files, sample programs for e.g. C, C++, C#, Visual Basic and Delphi, documentation, and more. Note: you need to download and install the appropriate device drivers separately.
|Kvaser SocketCAN Device Drivers|
|Kvaser SocketCAN Drivers for Linux.
|Kvaser DIADEM Driver|
|This free driver for National Instrument's DIAdem supports all CAN hardware from Kvaser.
|Kvaser Drivers for Windows|
|Windows drivers for all our CAN hardware. Please check release notes for information on which Windows versions are supported. It also contain a driver for the virtual CAN bus.
|A free of charge general-purpose CAN bus momnitor. Works with all CAN interfaces from Kvaser. Windows 200 and later recommended.
|Kvaser LabView VI Library for CAN|
|Library for National Instrument's LabView version for all Kvaser CAN hardware.
|Kvaser Linux Driver and SDK|
|Linux driver and SDK for Kvaser PCIcan/PCIcanx, Kvaser PCIcanII, Kvaser PC104+, Kvaser PCIcanx II, Kvaser USBcan II, Kvaser Memorator*, Kvaser Leaf family, Kvaser Memorator Pro**, Kvaser USBcan Pro and VirtualCAN. For LAPcan and LAPcan II, you should use version 4.2 of the driver. (*) only with USBcanII functionality, (**) only with USBcan Pro functionality
|Remove old drivers|
|Driver removal program. This program will remove the CAN driver (version 3.2 or older) from your computer. This is a version intended for those who have installed CANLIB 3.2 or older. Use it only if you need to remove an old version of the driver from your computer. Contact technical support if you have any questions.
|Driver removal program. This program will remove the CAN driver (version 3.9 or older) from your computer. This program will not work with driver 4.0 or later. Use it only if you need to remove an old version of the driver from your computer.