Click or scroll to zoom
Tap or pinch to zoom
PCAN T-Adapter
Click or scroll to zoom
Tap or pinch to zoom
PCAN T-Adapter
PCAN T-Adapter

PCAN T-Adapter

IPEK-003003
by PEAK-System Technik
$35
Lowest price - guaranteed

T-Adapter for CAN Tapping

The PCAN-T-Adapter creates a tap connection to the data cables and the ground within a CAN bus in order to be able to connect a CAN node. In this case, the CAN node is not terminated. 

The PCAN-T-Adapter can be used for both CAN FD and Classic CAN buses.

  • 9-pin D-Sub socket to 9-pin D-Sub connector and D-Sub socket (in accordance with CiA® 102)
  • CAN tap length about 20 cm
  • Unterminated

Special cable makeup on request

Related products

PCAN-MiniTerm
$10

PCAN-MiniTerm

PEAK-System Technik

Miniature CAN Termination Adapter The PCAN-MiniTerm adapter terminates a high-speed CAN bus (ISO 11898-2) at one end. It is used if a CAN node is c...

View full details
PCAN Termination Adapter
$20

PCAN Termination Adapter

PEAK-System Technik

CAN Termination Adapter The PCAN-Term adapter terminates a high-speed CAN bus (ISO 11898-2) at one end. It is used if a CAN node is connected witho...

View full details
PCAN Cable 2 w/ 120 Ohm termination
$29

PCAN Cable 2 w/ 120 Ohm termination

PEAK-System Technik

PCAN Cable 2 with two 120 Ohm CAN bus termination resistors These cables are needed to set up a CAN bus and are specially designed to be used in a ...

View full details
PCAN-Cable J1939
from $59

PCAN-Cable J1939

PEAK-System Technik

CAN-J1939 Adapter Cables (Type 1 & Type 2)The SAE J1939 protocol establishes consistent CAN messages for the communication and diagnosis betwee...

View full details
Optical CAN Bus Adapter (PCAN-Optoadapter)
$119

Optical CAN Bus Adapter (PCAN-Optoadapter)

PEAK-System Technik

The PCAN-Optoadapter is a universal plug-in adapter to allow galvanic isolation of High-speed CAN bus systems.Its integrated logic means that decou...

View full details
x