Kvaser Memorator Professional HS/HS CAN Datalogger
KV-00351-4Product is no longer available.
***This product has been discontinued. Please consider the Memorator Pro 2xHS v2 instead.***
The Kvaser Memorator Professional is a small, yet advanced portable CAN data logger which can also be used as a CAN bus interface. The device can be configured in many different ways to achieve the most suitable and effective logging for any occasion.
Kvaser’s Memorator Professional contains an advanced set of features including Message Filtering, Error Detection Mode, Triggers, Battery Backup, an expandable SD Card slot, Linx J1587 compatible, Auto Transmit, Galvanic Isolation among other. Connecting the logger to a PC provides direct access for configuring baud rates, trigger conditions and filters using the standalone Kvaser Memorator Tools
Kvaser Memorator Professional Functions:
Triggers and Data Logger capabilities
- Kvaser Memorator can log continuously, or logging can be triggered by creating advanced triggers based on messages, data signal values, error messages, external trigger's falling or rising edge, and I/O signals
- Pre- and post-triggers are available without buffer size restrictions, limited by disk space only
- Handles up to 20 000 msgs/s in standalone logger mode
- Transmit messages to the bus network
- External digital output that can drive a LED or a buzzer
- < 250 ms boot up time
- Supports Silent Mode - log bus traffic safely without interfering and "listen-only" mode for bus analysis tools
Filters
- Kvaser Memorator Professional can filter out selectable messages and/or signals to be logged. The identifiers can be picked from a database, or all messages can be logged
- Support for pass as well as stop filters
- Create a counting pass filter to have a message logged at enumerated occurrence
Memory cards and functions
- Standard MMC or SD type flash memory cards can be used - up to 2GB
- Support for 16GB SDHC cards. Larger SDHC cards supported in the future - up to 32GB
- Set up several devices in a daisy chain for larger logging capacity
- Transfer recorded data over the USB interface at 1.4 MB/s or an SD card reader at 15 MB/s
Configuration software in the PC
- Easy to use graphic configuration tool - Kvaser Memorator Professional Setup Tool
- Configuration of the CAN controller, i.e. bit rate and filters
- Configuration of the trigger conditions
- Configuration of filter for messages to be stored
- Configuration upload and download via USB
- Using the included Kvaser Dispatcher software, a complete measurement setup can be turned into a self-installing package that is sent to a remote location to carry out a specific logging task
- One device for desktop and laptop
- Functionality of a standalone CAN bus data logger and a USB CAN bus interface in a single device
- Support for Kvaser Linx J1587
- Driver support for major operating systems
- Quick and easy plug-and-play installation
- Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B) identifiers
- CAN messages are time-stamped with 2 microseconds resolution
- Large on-board RAM buffer for CAN messages
- 100% compatible with applications written for Kvaser Leaf, LAPcan, PCIcan, PCcan, USBcan, etc., with Kvaser's CANlib
- Two CAN connections ISO-11898-2 high-speed, 10 kbit/s up to 1 Mbit/s
- Galvanic isolation to protect the hardware
- 130mA current consumption
- Operating temperature range from -40 to + 85 C
- Power from CAN bus or from the USB side
- Built-in real time (calendar) clock with battery backup
- Logger status is indicated with five externally visible LEDs
- Plastic housing with dimension W*L*H about 50*90*25 mm (circa 2 x 3,5 x 1 inch)
Property | Value |
---|---|
The information herein is subject to change without notice. | |
Galvanic Isolation | Yes |
Bitrate | 10-1000 kbit/s |
Silent mode | Yes |
Error frame generation | Yes |
Error frame detection | Yes |
Weight | 150 grams |
Timestamp resolution | 2 |
On board buffer | Yes |
Maximum message rate, send | 20000 |
Maximum message rate, receive | 20000 |
Sound | No |
Clock synchronization | MagiSync |
Dimensions (WxLxH) | 50x90x25 mm (2.0x3.5x1.0in.) |
Getting Started Kvaser Memorator / Memorator Professional as Datalogger |
Startup Guide Getting Started Kvaser Memorator /Memorator Professional as Datalogger Version 2.0.0 |
Kvaser Database Editor Users Guide |
Kvaser Database Editor Users Guide Version 2.0.0 |
Kvaser Memorator Tools Introduction |
Introduction to Kvaser Memorator Tools for Kvaser Memorator Professional Version 1.0.0 |
Kvaser Memorator Professional Trigger Guide |
Kvaser Memorator Tools - Trigger Guide Version 2.0.0 |
Kvaser Memorator Professional Users Guide |
Kvaser Memorator Professional User's Guide Version 10.0.0 |
Trigger Kit for the Kvaser Memorator Family |
Trigger Kit for the Kvaser Memorator Family Version 2.0.0 |
Kvaser DIADEM Driver |
This free driver for National Instrument's DIAdem supports all CAN hardware from Kvaser. Version 1.0.0 |
Kvaser Drivers for Windows |
Windows drivers for all our CAN hardware. Please check release notes for information on which Windows versions are supported. It also contain a driver for the virtual CAN bus. Version 5.6.0 |
Kvaser Memorator Firmware |
Driver removal program. This program will remove the CAN driver (version 3.9 or older) from your computer. This program will not work with driver 4.0 or later. Use it only if you need to remove an old version of the driver from your computer. Version 3.9c |
Kvaser Firmware Update Tool |
Firmware Update tool for most Kvaser devices. Version V4.24.477 |
Kvaser Database Editor |
Standalone installer for Kvaser Database Editor. Version 2.4.109 |
Kvaser Memorator Tools |
Logger setup and configuration program for Kvaser Memorator Professional, Kvaser Memorator and Kvaser Memorator Light. Version 3.7.537 |
Kvaser CANKing |
A free of charge general-purpose CAN bus momnitor. Works with all CAN interfaces from Kvaser. Windows 200 and later recommended. Version 5.3.889 |
Kvaser CANlib SDK |
Software development kit - everything you need to develop software for the Kvaser CAN and LIN interfaces. Link libraries, header files, sample programs, Microsoft Visual Basic and Borland Delphi components, documentation, and more. Note: you need to download and install the appropriate device drivers separately Version 5.6.0 |
Kvaser LabView VI Library for CAN |
Library for National Instrument's LabView version for all Kvaser CAN hardware. Version 6.1.0 |
Kvaser Linux Driver and SDK |
Linux driver and SDK for Kvaser PCIcan/PCIcanx, Kvaser PCIcanII, Kvaser PC104+, Kvaser PCIcanx II, Kvaser USBcan II, Kvaser Memorator*, Kvaser Leaf family, Kvaser Memorator Pro**, Kvaser USBcan Pro and VirtualCAN. For LAPcan and LAPcan II, you should use version 4.2 of the driver. (*) only with USBcanII functionality, (**) only with USBcan Pro functionality Version 5.3.0 |
Remove old drivers |
Driver removal program. This program will remove the CAN driver (version 3.2 or older) from your computer. This is a version intended for those who have installed CANLIB 3.2 or older. Use it only if you need to remove an old version of the driver from your computer. Contact technical support if you have any questions. Version 3.9c |
Cleanup |
Driver removal program. This program will remove the CAN driver (version 3.9 or older) from your computer. This program will not work with driver 4.0 or later. Use it only if you need to remove an old version of the driver from your computer. Version 3.9c |