PCAN-USB X6 Adapter
IPEH-004062 , IPEH-004063 , IPEH-004064The new CAN FD standard (CAN with Flexible Data Rate) is primarily characterized by higher bandwidth for data transfer. Under CAN FD a maximum of 64 data bytes per CAN FD frame (instead of 8 so far) can be transmitted with bit rates up to 12 Mbit/s. CAN FD is downward-compatible to the CAN 2.0 A/B standard, thus CAN FD nodes can be used in existing CAN networks. However, in this case the CAN FD extensions are not applicable.
The delivery contents includes the free PCAN-View message monitoring app along with the PCAN-Basic API assisting users with fast and easy development of their own sophisticated CAN applications.
- Adapter for High-speed USB 2.0 (compatible to USB 1.1 and USB 3.0)
- 6 High-speed CAN channels with exchangable NXP TJA1044GT transceiver modules. Alternative transceivers with galvanic isolation up to 300 V on request
- Complies with CAN specifications 2.0 A/B and FD
- CAN FD support for ISO and Non-ISO standards switchable
- CAN FD bit rates for the data field (64 bytes max.) from 25 kbit/s up to 12 Mbit/s
- CAN bit rates from 25 kbit/s up to 1 Mbit/s
- Time stamp resolution 1 µs
- FPGA implementation of the CAN FD controller
- Status LEDs for CAN channels, USB upstream, and power supply
- CAN connection via D-Sub, 9-pin or M12 circular connectors, 5-pin (pin assignment of both connectors in accordance with CiA® 303-1)
- Aluminum casing with increased Ingress Protection (special order item with part number IPEH-004063)
- High-speed USB 2.0 downstream port (only for IPEH-004062)
- CAN termination can be activated through a solder jumper, separately for each CAN channel
- Measurement of bus load including error frames and overload frames on the physical bus
- Induced error generation for incoming and outgoing CAN messages
- Voltage supply from 8 to 30 V
- Extended operating temperature range
- from -40 to 85 °C (-40 to 185 °F)
Interface(s) | USB Upstream: USB plug type A, high-speed USB 2.0 (compatible to USB 1.1 and 3.0) USB Downstream: USB plug type A, high-speed USB 2.0 (compatible to USB 1.1 and 3.0), max. current output 500mA CAN: CAN FD 1.0 (compatible with CAN 2.0) ISO 11898-2, complies with CiA-recommendation DS 102 |
---|---|
Power Consumption | USB 5V max. 350 mA (w/o USB device on downstream connection) |
Baud Rate | CAN 2.0: 40 kBit/s ... 1 MBit/s CAN FD: 40 kBit/s ... 12 MBit/s |
Pinout | C.I.A. DS-102 (CAN_H = 7, CAN_L = 2, CAN_GND = 3) |
Transceiver | NXP TJA1044GT |
Dimensions | 170 x 93 x 65 mm (without connection cable) |
Weight | 550 g (w/o cable) |
Documentation | |
PCAN-USB X6 Manual | |
PDF User's Manual in English | |
Software | |
PCAN-View | |
Windows® software for displaying, transmitting, and recording CAN and CAN FD messages. | |
Driver | |
Device driver setup for Windows | |
PEAK-System installation package for device drivers and tools for Windows® 10, 8.1, 7 (32/64-bit) for our PC interfaces. Included tools: PEAK-CPL, PCAN-View, PLIN-View Pro, and Virtual PCAN-Gateway. |
|
Device driver for Linux | |
Device drivers for PEAK CAN interfaces from Kernel 2.4 and higher. | |
API | |
PCAN-Basic API | |
API for the development of applications with CAN and CAN FD connections for Windows® 10, 8.1, 7 (32/64-Bit) | |
PCAN-Basic API (Linux) | |
API for the development of applications with CAN connection for Linux | |
PCAN-CCP API | |
API for the development of software for the communication with ECUs according to the CAN Calibration Protocol (CCP) | |
PCAN-XCP API | |
API for the development of software for the communication with ECUs according to the Universal Measurement and Calibration Protocol (XCP) | |
PCAN-ISO-TP API | |
API for the transfer of data packages according to ISO-TP (ISO 15765-2) | |
PCAN-UDS API | |
API to communicate with control devices according to UDS (ISO 14229-1) | |
PCAN-OBD-2 API | |
API for the vehicle diagnostics according to OBD-2 (ISO 15765-4) | |
PCAN-Pass Through API | |
Pass-Thru API and connection of Pass-Thru software to PEAK CAN interfaces. Installation for Windows® 10, 8.1, 7 (32/64-bit) includes interface DLLs, a configuration software, the PCAN-Basic API, and the PCAN-ISO-TP API. The download also contains the documentation (English). |